Tecroc
join the Tecroc registeroverseasour businessnewsthe teambespoke productsnew productscontactrecruitment

Cement Based Highway Products

  Product Code Pack Weight Yield

Click the pdf icon to download datasheets.

Highway C1, C2, QSM and Universal conform to DTp HD27/94, Design Manual for Roads and Bridges, Volume 7, Section 2, 3.11. Mortars for bedding ironwork, such as manhole cover frames during repairs, may be trafficked when the strength is expected to be 20N/mm2. For rapid construction, this strength should be achieved within 2 hours. Highway C3 will achieve the required 20N/mm2 in 3 hours. QSM, C1, C2 and C3 are a family of products designed for the bedding of manhole frames and road furniture with specific timing for road opening.

QSM Road opening within 45 minutes
C1 Road opening within 1 hour
C2 Road opening within 2 hours
C3 Road opening within 3 hours

     
Click the pdf icon to download datasheets. QSM High early strength bedding mortar. Designed for bedding manholes and fixing road furniture. Road opening within 45mins Specification data to BBA certificate (BBA ADS: 003/95).
Strength 45mins 22N/mm2
28day 51N/mm2
Thickness 15mm to 50mm
DH16 25kg
bag
12.75ltrs
Click the pdf icon to download datasheets. Highway C1 Pre-mixed Portland cement based non shrink bedding mortar. Suitable for the support of road ironwork and highway furniture. When placed, will harden in approximately 10 minutes to allow continuation work.
Strength 1hr 22N/mm2
1day 41N/mm2
28day 70N/mm2
Thickness 15mm to 50mm each layer. For greater thickness add up to 30% clean dry pea shingle
DH01 25kg
bag
12.75ltrs
Click the pdf icon to download datasheets. Highway C2 Pre-mixed Portland cement based non shrink bedding mortar. Suitable for the support of road ironwork and highway furniture. When placed, will harden in approximately 10 minutes to allow continuation work.
Strength 2hrs 21N/mm2
1 day 40N/mm2
28day 70N/mm2
Thickness 15mm to 50mm each layer. For greater thickness add up to 30% clean dry pea shingle
DH02 25kg
bag
12.75ltrs
Click the pdf icon to download datasheets. Highway C3 Pre-mixed Portland cement based non shrink bedding mortar. Suitable for the support of road ironwork and highway furniture. When placed, will harden in approximately 10 minutes to allow continuation work.
Strength 1day 37N/mm2
7day 50N/mm2
28day 60N/mm2
Thickness 15mm to 50mm each layer. For greater thickness add up to 30% clean dry pea shingle
DH03 25kg
bag
12.75ltrs
Click the pdf icon to download datasheets. Highway Fast Patch Fast setting patch and repair material. Designed to allow highways to be opened in 1 hour to foot traffic and 4 hours to vehicles.
Strength 4hrs 20N/mm2
28day 50N/mm2
Thickness 10mm to 100mm
DH08 10kg
pail
5ltrs
Click the pdf icon to download datasheets. Fastset Cement Blend of selected cements and additives. Designed to produce on site rapid high early strength mortars and concretes. Used where rapid early strength gain is required using economic product mixes, up to 6 to 1 aggregate to Fastset Cement. Road opening within 1 hour. Typical strengths dependent on mix design.
Strength 1hr 23N/mm2
28day 61N/mm2
Thickness 10mm to 250mm
DH58 25kg
bag
N/A
Click the pdf icon to download datasheets. Fastset Concrete Rapid high early strength pre-packed concrete. Designed for thick section placing where rapid early strength gain is required. May be placed at temperatures down to 5ºC. Road opening can be achieved at 60 minutes. Uses include installation of road furniture, barriers and stanchion posts.
Strength 2hrs 22N/mm2
28day 54N/mm2
Thickness 20mm to 200mm
DH57 25kg
bag
12ltrs
Click the pdf icon to download datasheets. Powercement Quick setting ultra rapid hardening cement. Can be used with sand, sand/aggregate (concrete). Must have at least 350kg/m3 of Powercement.
Typical strengths dependent on mix design
Strength - concrete mix 3hrs 25N/mm2
28day 62N/mm2
Strength - sand mix 3hrs 28N/mm2
28day 63N/mm2
DH120 25kg
bag
N/A
Click the pdf icon to download datasheets. Super C Very low and moderate temperature use mortar Magnesium phosphate based designed for use in cold rooms and other extreme situations. Can be trafficked in less than 1 hour.
Strength 45mins 14N/mm2
28day 57N/mm2
Thickness 20mm to 50mm
DH55

DH56
25kg
bag
25kg
pail
12ltrs

12ltrs
Click the pdf icon to download datasheets. Universal Low to moderate temperature bedding mortar. Designed for bedding manholes and fixing road furniture. Road opening within 1 hour at 20°C.
Strength 1hr 20N/mm2
28day 47N/mm2
Thickness 10mm to 50mm
DH40 25kg
bag
12.75ltrs

Back to index

 

 


overseas | our business | news | the team | bespoke products
new products | contact | recruitment